refind network and monitor wifi connection

app.yaml

@@ -21,4 +21,5 @@ files:
   - shot_id_generator.py
   - time_sync.py
   - version.py
-  - vision.py
+  - vision.cpython-311-riscv64-linux-gnu.so
+  - wifi.py

design_doc/solution_record.md

@@ -80,4 +80,26 @@
     自动关机的时机： 超过配置的idle时长，
     禁止自动关机的情况：1.校准中，2.OTA中
     重启计时的时机：1.校准完成，2.命令触发射箭，3.真实触发射箭，4.初始化完成
-9. 
+9. Wifi网络监控：
+有两次发现wifi网络下，有些消息发送很慢，但具体是什么缘故还不清楚，现在增加了wifi网络下的检测，并一旦发现wifi的网络质量差，就会切换到4G。
+WiFi 连接成功
+    ↓
+启动后台监测线程
+    ↓
+每 5 秒循环：
+    测量 RTT (1 样本，600ms timeout)
+    获取 RSSI
+    更新缓存
+    判断是否差：
+        - RTT >= 600ms → 差
+        - RTT >= 350ms 且 RSSI <= -80dBm → 差
+    ↓
+如果质量差：
+    快速重试2次，如果其中任意一次网络恢复了，继续使用wifi。否则，
+    调用 _switch_to_4g_due_to_poor_wifi()
+    关闭 WiFi socket
+    重置连接状态
+    尝试切换到 4G
+    ↓
+上层检测到连接断开：
+    重新 connect_server() → 自动选择 4G

network.py

@@ -5,6 +5,7 @@
 提供TCP通信、数据包打包/解析、队列管理等功能
 """
 import json
+import re
 from math import e
 import struct
 from maix import time
@@ -21,6 +22,7 @@ from power import get_bus_voltage, voltage_to_percent
 # from laser import laser_manager
 # from ota import ota_manager
 from logger_manager import logger_manager
+from wifi import wifi_manager
 
 
 class NetworkManager:
@@ -49,14 +51,11 @@ class NetworkManager:
         self._raw_line_data = []
         self._manual_trigger_flag = False
         
-        # WiFi 相关状态
+        # 网络类型状态
-        self._network_type = None  # "wifi" 或 "4g" 或 None
+        self._network_type = None  # "wifi" 或 "4G" 或 None
-        self._wifi_connected = False
+        # 本次上电曾因 WiFi 质量差切换到 4G 后，直至关机不再改回 WiFi
-        self._wifi_ip = None
+        self._session_force_4g = False
-        self._wifi_socket = None
+                
-        self._wifi_socket_lock = threading.Lock()
-        self._prefer_wifi = True  # 是否优先使用WiFi
-        self._wifi_recv_buffer = b""  # WiFi接收缓冲区
         self._initialized = True
 
         # 导入 archery_netcore 模块，并检查是否存在 parse_packet 和 make_packet 函数
@@ -117,12 +116,12 @@ class NetworkManager:
     @property
     def wifi_connected(self):
         """WiFi是否已连接"""
-        return self._wifi_connected
+        return wifi_manager.wifi_connected
     
     @property
     def wifi_ip(self):
         """WiFi IP地址"""
-        return self._wifi_ip
+        return wifi_manager.wifi_ip
 
     # ==================== 内部状态管理方法 ====================
 
@@ -200,39 +199,15 @@ class NetworkManager:
         self._password = default_id + "."
         return default_id
     
-    # ==================== WiFi 管理方法 ====================
+    # ==================== WiFi 管理方法（委托给 wifi_manager）====================
         
     def is_wifi_connected(self):
         """检查WiFi是否已连接"""
-        # 优先用 MaixPy network（如果可用）
+        return wifi_manager.is_wifi_connected()
-        try:
-            from maix import network
-            wlan = network.WLAN(network.TYPE_WIFI)
-            if wlan.isconnected():
-                self._wifi_connected = True
-                return True
-        except:
-            pass
-        
-        # 兜底：看系统 wlan0 有没有 IP
-        try:
-            ip = os.popen("ifconfig wlan0 2>/dev/null | grep 'inet ' | awk '{print $2}'").read().strip()
-            if ip:
-                self._wifi_connected = True
-                self._wifi_ip = ip
-                return True
-        except:
-            pass
-        
-        self._wifi_connected = False
-        return False
         
     def connect_wifi(self, ssid, password, verify_host=None, verify_port=None, persist=True, timeout_s=20):
         """
-        连接 Wi-Fi（先用新凭证尝试连接并验证可用性；失败自动回滚；成功后再决定是否落盘）
+        连接 Wi-Fi（委托给 wifi_manager）
-        
-        重要：系统的 /etc/init.d/S30wifi 通常会读取 /boot/wifi.ssid 与 /boot/wifi.pass 来连接 WiFi。
-        因此要“真正尝试连接新 WiFi”，必须临时写入 /boot/ 触发重启；若失败则把旧值写回去（回滚）。
             
         Returns:
             (ip, error): IP地址和错误信息（成功时error为None）
@@ -369,6 +344,77 @@ class NetworkManager:
     
     # ==================== 网络选择策略 ====================
     
+    def _get_wifi_rssi_dbm(self):
+        """获取 WiFi 信号强度（委托给 wifi_manager）"""
+        return wifi_manager._get_wifi_rssi_dbm()
+    
+    def _measure_wifi_tcp_rtt_ms(self, host, port, samples=3, per_sample_timeout_ms=900):
+        """测量 WiFi TCP RTT（委托给 wifi_manager）"""
+        return wifi_manager._measure_wifi_tcp_rtt_ms(host, port, samples, per_sample_timeout_ms)
+    
+    def _is_wifi_quality_bad(self, wifi_rtt_ms, wifi_rssi_dbm):
+        """判断 WiFi 质量是否差（委托给 wifi_manager）"""
+        return wifi_manager._is_wifi_quality_bad(wifi_rtt_ms, wifi_rssi_dbm)
+
+    def is_4g_available(self):
+        """
+        快速判断 4G 是否可用（不做 DNS，仅验证 SIM/附着/有 IP）
+        兼容性兜底：若未拿到 IP，再补充设置 APN 并激活 PDP context
+        """
+        try:
+            atc = hardware_manager.at_client
+            if atc is None:
+                return False
+
+            with self.get_uart_lock():
+                # 1) SIM 就绪
+                r = atc.send("AT+CPIN?", "READY", 3000)
+                if "READY" not in r:
+                    return False
+
+                # 2) 尝试附着到网络
+                # 不同模块返回可能略有差异，所以做宽松解析
+                r2 = atc.send("AT+CGATT?", "OK", 3000)
+                m = re.search(r"\+CGATT:\s*(\d+)", r2)
+                attached = int(m.group(1)) == 1 if m else None
+                if attached is False or attached is None:
+                    atc.send("AT+CGATT=1", "OK", 5000)
+
+                # 3) 查询 PDP 地址（有 IP 表示网络可用）
+                def _extract_ip(resp: str):
+                    m3 = re.search(r"(\d{1,3}\.){3}\d{1,3}", resp or "")
+                    if not m3:
+                        return None
+                    ip = m3.group(0)
+                    if ip.startswith("0.") or ip.startswith("127."):
+                        return None
+                    return ip
+
+                r3 = atc.send("AT+CGPADDR=1", "OK", 3000)
+                ip = _extract_ip(r3)
+                if ip:
+                    return True
+
+                # 4) 若没 IP：补充设置 APN + 激活 PDP（某些网络/模组需要这一步）
+                atc.send('AT+CGDCONT=1,"IP","CMNET"', "OK", 3000)
+
+                qact_resp = atc.send("AT+CGACT?", "OK", 3000)
+                if "+CGACT:" not in (qact_resp or "") or "1,1" not in (qact_resp or ""):
+                    atc.send("AT+CGACT=1,1", "OK", 10000)
+
+                r4 = atc.send("AT+CGPADDR=1", "OK", 3000)
+                ip2 = _extract_ip(r4)
+                if ip2:
+                    return True
+                return False
+        except Exception:
+            return False
+
+    def _apply_session_force_4g(self):
+        """锁定本次会话为 4G（直到关机，期间不再回切 WiFi）"""
+        self._session_force_4g = True
+        self._network_type = "4g"
+    
     def select_network(self, prefer_wifi=None):
         """
         自动选择网络（WiFi优先）
@@ -380,33 +426,109 @@ class NetworkManager:
             "wifi" 或 "4g" 或 None（无可用网络）
         """
         if prefer_wifi is None:
-            prefer_wifi = self._prefer_wifi
+            prefer_wifi = wifi_manager.prefer_wifi
 
-        # 策略1：如果指定优先WiFi，且WiFi可用，使用WiFi
+        # 本次会话锁定：只要 4G 可用就一直用 4G
-        if prefer_wifi and self.is_wifi_connected():
+        if self._session_force_4g:
-            # 检查WiFi是否能连接到服务器
+            self.logger.info("[NET] 会话锁定 4G：继续使用 4G（跳过 WiFi 质量评估）")
-            if self.is_server_reachable(self._server_ip, self._server_port, timeout=3):
-                self._network_type = "wifi"
-                self.logger.info(f"[NET] 选择WiFi网络，IP: {self._wifi_ip}")
-                import os
-                os.environ["TZ"] = "Asia/Shanghai"
-                os.system("ntpdate pool.ntp.org")
-                return "wifi"
-            else:
-                self.logger.warning("[NET] WiFi已连接但无法访问服务器，尝试4G")
-        
-        # 策略2：如果WiFi可用，使用WiFi
-        if self.is_wifi_connected():
-            if self.is_server_reachable(self._server_ip, self._server_port, timeout=3):
-                self._network_type = "wifi"
-                self.logger.info(f"[NET] 选择WiFi网络，IP: {self._wifi_ip}")
-                return "wifi"
-        
-        # 策略3：回退到4G
-        self.logger.info("[NET] WiFi不可用或无法连接服务器，使用4G网络")
             self._network_type = "4g"
             return "4g"
         
+        host = self._server_ip
+        port = self._server_port
+
+        # 1) 开机先尝试 WiFi，并评估质量
+        if prefer_wifi and self.is_wifi_connected():
+            wifi_rssi_dbm = self._get_wifi_rssi_dbm()
+            wifi_rtt_ms, wifi_reachable = self._measure_wifi_tcp_rtt_ms(
+                host, port,
+                samples=getattr(config, "WIFI_QUALITY_RTT_SAMPLES", 3),
+                per_sample_timeout_ms=900,
+            )
+            wifi_bad = self._is_wifi_quality_bad(wifi_rtt_ms, wifi_rssi_dbm)
+
+            try:
+                self.logger.info(
+                    f"[NET] WiFi质量评估：rtt_ms(median)={wifi_rtt_ms:.1f}, rssi_dbm={wifi_rssi_dbm}, "
+                    f"reachable={wifi_reachable}, bad={wifi_bad}"
+                )
+            except Exception:
+                pass
+
+            # 如果质量差且 4G 可用 -> 切换 4G 并锁定本次会话
+            if wifi_bad and self.is_4g_available():
+                self._apply_session_force_4g()
+                self.logger.warning("[NET] WiFi质量差且 4G 可用 -> 切换到 4G并锁定本次会话")
+                return "4g"
+
+            # 否则：仍以 WiFi 为主，但如果服务器不可达则回退到 4G
+            if wifi_reachable or self.is_server_reachable(host, port, timeout=3):
+                self._network_type = "wifi"
+                self.logger.info(f"[NET] 选择WiFi网络，IP: {wifi_manager.wifi_ip}")
+                try:
+                    os.environ["TZ"] = "Asia/Shanghai"
+                    os.system("ntpdate pool.ntp.org")
+                except Exception:
+                    pass
+                return "wifi"
+
+            # WiFi可用但服务器不可达
+            self.logger.warning("[NET] WiFi可用但服务器不可达，尝试4G")
+
+        # 2) 如果 WiFi 没法用/不想用，回退到 4G
+        if self.is_4g_available():
+            self._network_type = "4g"
+            self.logger.info("[NET] 选择4G网络")
+            return "4g"
+
+        # 3) 两者都不可用
+        self.logger.error("[NET] WiFi 与 4G 均不可用")
+        return None
+    
+    def _start_wifi_quality_monitor(self):
+        """
+        启动 WiFi 质量后台监测线程（委托给 wifi_manager）
+        """
+        wifi_manager.start_quality_monitor(
+            network_type_callback=lambda: self._network_type,
+            on_poor_quality_callback=self._switch_to_4g_due_to_poor_wifi
+        )
+    
+    def _stop_wifi_quality_monitor(self):
+        """停止 WiFi 质量监测线程（委托给 wifi_manager）"""
+        wifi_manager.stop_quality_monitor()
+    
+    def get_wifi_quality_status(self):
+        """获取当前 WiFi 质量状态（委托给 wifi_manager）"""
+        return wifi_manager.get_wifi_quality_status()
+        
+    def _switch_to_4g_due_to_poor_wifi(self):
+        """
+        由于 WiFi 质量差，切换到 4G 网络
+        """
+        self.logger.info("[WiFi->4G] 开始切换到 4G 网络")
+            
+        # 1. 标记本次上电强制使用 4G
+        self._session_force_4g = True
+            
+        # 2. 关闭 WiFi socket
+        wifi_manager.disconnect_wifi()
+            
+        # 3. 重置连接状态
+        self._tcp_connected = False
+        self._network_type = None  # 清空，让 select_network 重新选择
+            
+        # 4. 检查 4G 是否可用
+        if self.is_4g_available():
+            self._network_type = "4g"
+            self.logger.info("[WiFi->4G] 切换成功，将使用 4G 网络")
+            return True
+        else:
+            self.logger.error("[WiFi->4G] 4G 不可用，无法切换")
+            # 回退：继续使用 WiFi（虽然质量差）
+            self._session_force_4g = False
+            return False
+
     
     def safe_enqueue(self, data_dict, msg_type=2, high=False):
         """线程安全地将消息加入队列（公共方法）"""
@@ -485,32 +607,36 @@ class NetworkManager:
         """通过WiFi建立TCP连接"""
         try:
             # 创建TCP socket
-            self._wifi_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+            wifi_manager.wifi_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-            self._wifi_socket.settimeout(5.0)  # 5秒超时
+            wifi_manager.wifi_socket.settimeout(5.0)  # 5秒超时
             
             # 连接到服务器
             addr_info = socket.getaddrinfo(config.SERVER_IP, config.SERVER_PORT, 
                                            socket.AF_INET, socket.SOCK_STREAM)[0]
-            self._wifi_socket.connect(addr_info[-1])
+            wifi_manager.wifi_socket.connect(addr_info[-1])
             
             # 设置非阻塞模式（用于接收数据）
-            self._wifi_socket.setblocking(False)
+            wifi_manager.wifi_socket.setblocking(False)
             # 加快消息发送
-            self._wifi_socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+            wifi_manager.wifi_socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
                         
             self._tcp_connected = True
-            self.logger.info("[WIFI-TCP] TCP连接已建立")
+            self.logger.info("[WIFI-TCP] TCP 连接已建立")
+                        
+            # 启动 WiFi 质量后台监测
+            self._start_wifi_quality_monitor()
+                        
             return True
             
         except Exception as e:
             self.logger.error(f"[WIFI-TCP] 连接失败: {e}")
             
-            if self._wifi_socket:
+            if wifi_manager.wifi_socket:
                 try:
-                    self._wifi_socket.close()
+                    wifi_manager.wifi_socket.close()
                 except:
                     pass
-                self._wifi_socket = None
+                wifi_manager.wifi_socket = None
             
             return False
     
@@ -543,12 +669,12 @@ class NetworkManager:
     
     def _check_wifi_connection(self):
         """检查WiFi TCP连接是否仍然有效"""
-        if not self._wifi_socket:
+        if not wifi_manager.wifi_socket:
             return False
         try:
             # send(b"") 在很多实现里是 no-op，无法可靠探测断线。
             # 用非阻塞 peek 来判断：若对端已关闭，recv 会返回 b""。
-            data = self._wifi_socket.recv(1, socket.MSG_PEEK | socket.MSG_DONTWAIT)
+            data = wifi_manager.wifi_socket.recv(1, socket.MSG_PEEK | socket.MSG_DONTWAIT)
             if data == b"":
                 raise OSError("wifi socket closed")
             return True
@@ -561,7 +687,7 @@ class NetworkManager:
             if err in (11, 35, 10035):  # EAGAIN/EWOULDBLOCK on linux/mac/win
                 return True
     
-            # 某些平台会把“无数据可读/超时”抛成 socket.timeout / TimeoutError，errno 可能为 None，
+            # 某些平台会把"无数据可读/超时"抛成 socket.timeout / TimeoutError，errno 可能为 None，
             # 这不代表断线：视为 benign，交给真正的 send/recv 去判定断线。
             if (err is None) and (("timed out" in str(e).lower()) or isinstance(e, (TimeoutError, socket.timeout))):
                 try:
@@ -571,7 +697,7 @@ class NetworkManager:
                 return True
     
             # 某些嵌入式 socket 实现可能不支持 MSG_PEEK/MSG_DONTWAIT，或返回 EINVAL/ENOTSUP。
-            # 这种情况不代表断线：选择“无法检测但不判死”，交给真正的 send/recv 去触发断线处理。
+            # 这种情况不代表断线：选择"无法检测但不判死"，交给真正的 send/recv 去触发断线处理。
             # 常见：EINVAL(22), ENOTSUP(95), EOPNOTSUPP(95), EINTR(4)
             if err in (4, 22, 95):
                 try:
@@ -586,31 +712,31 @@ class NetworkManager:
             except:
                 pass
     
-            # 明确的“连接不可用”错误才判定断线并清理
+            # 明确的"连接不可用"错误才判定断线并清理
             # 常见：ENOTCONN(107), ECONNRESET(104), EPIPE(32), EBADF(9)
             if err in (9, 32, 104, 107, 10054, 10057):
                 try:
-                    self._wifi_socket.close()
+                    wifi_manager.wifi_socket.close()
                 except:
                     pass
-                self._wifi_socket = None
+                wifi_manager.wifi_socket = None
                 self._tcp_connected = False
                 return False
     
             # socket已断开或不可用，清理
             try:
-                self._wifi_socket.close()
+                wifi_manager.wifi_socket.close()
             except:
                 pass
-            self._wifi_socket = None
+            wifi_manager.wifi_socket = None
             self._tcp_connected = False
             return False
         except Exception:
             try:
-                self._wifi_socket.close()
+                wifi_manager.wifi_socket.close()
             except:
                 pass
-            self._wifi_socket = None
+            wifi_manager.wifi_socket = None
             self._tcp_connected = False
             return False
     
@@ -628,14 +754,18 @@ class NetworkManager:
         self._network_type = None
     
     def _disconnect_tcp_via_wifi(self):
-        """断开WiFi TCP连接"""
+        """断开 WiFi TCP 连接并停止监测"""
-        with self._wifi_socket_lock:
+        # 先停止监测线程
-            if self._wifi_socket:
+        self._stop_wifi_quality_monitor()
+            
+        # 再关闭 socket
+        with wifi_manager.wifi_socket_lock:
+            if wifi_manager.wifi_socket:
                 try:
-                    self._wifi_socket.close()
+                    wifi_manager.wifi_socket.close()
                 except:
                     pass
-                self._wifi_socket = None
+                wifi_manager.wifi_socket = None
     
     def _disconnect_tcp_via_4g(self):
         link_id = getattr(config, "TCP_LINK_ID", 0)
@@ -672,16 +802,16 @@ class NetworkManager:
     
     def _tcp_send_raw_via_wifi(self, data: bytes, max_retries=2) -> bool:
         """通过WiFi socket发送TCP数据"""
-        if not self._wifi_socket:
+        if not wifi_manager.wifi_socket:
             return False
         
-        with self._wifi_socket_lock:
+        with wifi_manager.wifi_socket_lock:
             for attempt in range(max_retries):
                 try:
-                    # 标准socket发送
+                    # 标准 socket 发送
                     total_sent = 0
                     while total_sent < len(data):
-                        sent = self._wifi_socket.send(data[total_sent:])
+                        sent = wifi_manager.wifi_socket.send(data[total_sent:])
                         if sent == 0:
                             # socket连接已断开
                             self.logger.warning(f"[WIFI-TCP] 发送失败，socket已断开（尝试 {attempt+1}/{max_retries}）")
@@ -698,19 +828,19 @@ class NetworkManager:
                     self.logger.error(f"[WIFI-TCP] 发送异常: {e}（尝试 {attempt+1}/{max_retries}）")
                     # 发送异常通常意味着连接已不可用，主动关闭以触发重连
                     try:
-                        self._wifi_socket.close()
+                        wifi_manager.wifi_socket.close()
                     except:
                         pass
-                    self._wifi_socket = None
+                    wifi_manager.wifi_socket = None
                     self._tcp_connected = False
                     return False
                 except Exception as e:
                     self.logger.error(f"[WIFI-TCP] 未知错误: {e}（尝试 {attempt+1}/{max_retries}）")
                     try:
-                        self._wifi_socket.close()
+                        wifi_manager.wifi_socket.close()
                     except:
                         pass
-                    self._wifi_socket = None
+                    wifi_manager.wifi_socket = None
                     self._tcp_connected = False
                     return False
             
@@ -747,15 +877,14 @@ class NetworkManager:
         verify_mode = getattr(config, "SSL_VERIFY_MODE", 0)
 
         # 1) 配置认证方式
-        # r = hardware_manager.at_client.send(f'AT+MSSLCFG="auth",{ssl_id},{auth_mode}', "OK", 3000)
+        r = hardware_manager.at_client.send(f'AT+MSSLCFG="auth",{ssl_id},{auth_mode}', "OK", 3000)
-        r = hardware_manager.at_client.send(f'AT+MSSLCFG="auth",{ssl_id},0', "OK", 3000)
+        # r = hardware_manager.at_client.send(f'AT+MSSLCFG="auth",{ssl_id},0', "OK", 3000)
         self.logger.info(f"[4G-TCP] AT+MSSLCFG=\"auth\",{ssl_id},0 response: {r}")
         if "OK" not in r:
             return False
 
         # 2) 写入根证书（只有 verify_mode=1 才需要）
-        # if verify_mode == 1:
+        if verify_mode == 1:
-        if False:
             cert_filename = getattr(config, "SSL_CERT_FILENAME", None)
             cert_path = getattr(config, "SSL_CERT_PATH", None)
             if not cert_filename or not cert_path:
@@ -767,6 +896,7 @@ class NetworkManager:
 
             # 按手册：AT+MSSLCERTWR="file",0,size -> 等待 ">" -> 写入证书内容 -> 等 OK
             r = hardware_manager.at_client.send(f'AT+MSSLCERTWR="{cert_filename}",0,{len(cert_data)}', ">", 5000)
+            self.logger.info(f"[4G-TCP] AT+MSSLCERTWR=\"{cert_filename}\",0,{len(cert_data)} response: {r}")
             if ">" not in r:
                 return False
 
@@ -774,18 +904,36 @@ class NetworkManager:
             hardware_manager.uart4g.write(cert_data)
 
             r = hardware_manager.at_client.send("", "OK", 8000)
+            self.logger.info(f"[4G-TCP] AT+MSSLCERTWR=\"{cert_filename}\",0,{len(cert_data)} response: {r}")
             if "OK" not in r:
                 return False
 
+            r = hardware_manager.at_client.send(f'AT+MSSLCHECK="{cert_filename}"', "OK", 8000)
+            if "OK" not in r:
+                self.logger.error(f"[4G-TCP] MSSLCHECK failed, response: {r}")
+                return False
+            else:
+                self.logger.info(f"[4G-TCP] MSSLCHECK response: {r}")
+            
+            r = hardware_manager.at_client.send(f'AT+MSSLLIST=1', "OK", 3000)
+            self.logger.info(f"[4G-TCP] AT+MSSLLIST=1 response: {r}")
+
+            r = hardware_manager.at_client.send(f'AT+MSSLCERTRD="{cert_filename}"', "OK", 3000)
+            self.logger.info(f"[4G-TCP] AT+MSSLCERTRD=\"{cert_filename}\" response: {r}")
+        
+
             # 3) 引用根证书
             r = hardware_manager.at_client.send(f'AT+MSSLCFG="cert",{ssl_id},"{cert_filename}"', "OK", 3000)
             if "OK" not in r:
                 return False
+            else:
+                self.logger.info(f"[4G-TCP] MSSLCFG(cert) response: {r}")
 
         # 4) 绑定 TCP 通道到 ssl_id，并启用
         r = hardware_manager.at_client.send(f'AT+MIPCFG="ssl",{link_id},{ssl_id},1', "OK", 3000)
         self.logger.info(f"[4G-TCP] AT+MIPCFG=\"ssl\",{link_id},{ssl_id},1 response: {r}")   
         if "OK" not in r:
+            self.logger.error(f"[4G-TCP] MIPCFG(ssl) failed, response: {r}")
             return False
 
         return True
@@ -800,13 +948,13 @@ class NetworkManager:
         Returns:
             bytes: 接收到的数据，如果没有数据则返回 b""
         """
-        if not self._wifi_socket:
+        if not wifi_manager.wifi_socket:
             return b""
             
         try:
             # 这里保持 socket 为非阻塞模式（连接时已 setblocking(False)）。
-            # 不要反复 settimeout()，否则会把 socket 切回“阻塞+超时”，并导致 conncheck 误报 timed out。
+            # 不要反复 settimeout()，否则会把 socket 切回"阻塞+超时"，并导致 conncheck 误报 timed out。
-            data = self._wifi_socket.recv(4096)  # 每次最多接收4KB（无数据会抛 BlockingIOError）
+            data = wifi_manager.wifi_socket.recv(4096)  # 每次最多接收4KB（无数据会抛 BlockingIOError）
             return data
     
         except BlockingIOError:
@@ -818,10 +966,10 @@ class NetworkManager:
                 
             # 关闭socket
             try:
-                self._wifi_socket.close()
+                wifi_manager.wifi_socket.close()
             except:
                 pass
-            self._wifi_socket = None
+            wifi_manager.wifi_socket = None
             self._tcp_connected = False
                 
             return b""
@@ -1150,19 +1298,19 @@ class NetworkManager:
                         data = self.receive_tcp_data_via_wifi(timeout_ms=50)
                         if data:
                             # 将数据添加到缓冲区
-                            self._wifi_recv_buffer += data
+                            wifi_manager.recv_buffer += data
 
                             # 尝试从缓冲区解析完整的数据包
-                            while len(self._wifi_recv_buffer) >= 12:  # 至少需要12字节的头部
+                            while len(wifi_manager.recv_buffer) >= 12:  # 至少需要12字节的头部
                                 # 解析头部
                                 try:
-                                    body_len, msg_type, checksum = struct.unpack(">III", self._wifi_recv_buffer[:12])
+                                    body_len, msg_type, checksum = struct.unpack(">III", wifi_manager.recv_buffer[:12])
                                     total_len = 12 + body_len
 
-                                    if len(self._wifi_recv_buffer) >= total_len:
+                                    if len(wifi_manager.recv_buffer) >= total_len:
                                         # 有完整的数据包
-                                        payload = self._wifi_recv_buffer[:total_len]
+                                        payload = wifi_manager.recv_buffer[:total_len]
-                                        self._wifi_recv_buffer = self._wifi_recv_buffer[total_len:]
+                                        wifi_manager.recv_buffer = wifi_manager.recv_buffer[total_len:]
                                         item = (0, payload)  # link_id=0 for WiFi
                                         break
                                     else:
@@ -1170,7 +1318,7 @@ class NetworkManager:
                                         break
                                 except:
                                     # 解析失败，清空缓冲区
-                                    self._wifi_recv_buffer = b""
+                                    wifi_manager.recv_buffer = b""
                                     break
                     elif self._network_type == "4g":
                         # 4G接收数据
@@ -1296,6 +1444,11 @@ class NetworkManager:
                                 # 自动判断模式：如果没有明确指定，根据WiFi连接状态和凭证决定
                                 if mode not in ("4g", "wifi"):
                                     self.logger.info("ota missing mode, auto-detecting...")
+                                    # 若本次会话已锁定 4G，则 OTA 自动也走 4G，避免后续回切导致体验不一致
+                                    if self._session_force_4g:
+                                        mode = "4g"
+                                        self.logger.info("ota auto-selected: 4g (session locked on 4g)")
+                                    else:
                                         # 只有同时满足：WiFi已连接 且 提供了WiFi凭证，才使用WiFi
                                         if self.is_wifi_connected() and ssid and password:
                                             mode = "wifi"

wifi.py

@@ -0,0 +1,572 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+WiFi管理模块
+提供WiFi连接、网络检测、质量监测等功能
+"""
+import os
+import re
+import socket
+import threading
+import time as std_time
+from maix import time
+
+import config
+from logger_manager import logger_manager
+
+
+class WiFiManager:
+    """WiFi管理器（单例）"""
+    _instance = None
+    
+    def __new__(cls):
+        if cls._instance is None:
+            cls._instance = super(WiFiManager, cls).__new__(cls)
+            cls._instance._initialized = False
+        return cls._instance
+    
+    def __init__(self):
+        if self._initialized:
+            return
+        
+        # WiFi 相关状态
+        self._wifi_connected = False
+        self._wifi_ip = None
+        self._wifi_socket = None
+        self._wifi_socket_lock = threading.Lock()
+        self._prefer_wifi = True  # 是否优先使用 WiFi
+        self._recv_buffer = b""  # TCP 接收缓冲区
+        
+        # WiFi 质量监测（后台线程）
+        self._wifi_quality_monitor_thread = None
+        self._wifi_quality_stop_event = threading.Event()
+        self._last_wifi_rtt_ms = None  # 最近一次测量的 RTT
+        self._last_wifi_rssi_dbm = None  # 最近一次测量的 RSSI
+        
+        # 服务器相关（用于网络检测）
+        try:
+            import archery_netcore as _netcore
+            self._server_ip = _netcore.get_config().get("SERVER_IP")
+            self._server_port = _netcore.get_config().get("SERVER_PORT")
+        except Exception:
+            self._server_ip = getattr(config, "SERVER_IP", None)
+            self._server_port = getattr(config, "SERVER_PORT", None)
+        
+        self._initialized = True
+    
+    @property
+    def logger(self):
+        """获取 logger 对象"""
+        return logger_manager.logger
+    
+    @property
+    def wifi_connected(self):
+        """WiFi是否已连接"""
+        return self._wifi_connected
+    
+    @property
+    def wifi_ip(self):
+        """WiFi IP地址"""
+        return self._wifi_ip
+    
+    @property
+    def wifi_socket(self):
+        """WiFi socket对象"""
+        return self._wifi_socket
+    
+    @wifi_socket.setter
+    def wifi_socket(self, value):
+        """设置WiFi socket对象"""
+        self._wifi_socket = value
+    
+    @property
+    def wifi_socket_lock(self):
+        """获取WiFi socket锁"""
+        return self._wifi_socket_lock
+    
+    @property
+    def prefer_wifi(self):
+        """是否优先使用WiFi"""
+        return self._prefer_wifi
+    
+    @prefer_wifi.setter
+    def prefer_wifi(self, value):
+        """设置是否优先使用WiFi"""
+        self._prefer_wifi = value
+    
+    @property
+    def last_wifi_rtt_ms(self):
+        """最近一次测量的RTT"""
+        return self._last_wifi_rtt_ms
+    
+    @property
+    def last_wifi_rssi_dbm(self):
+        """最近一次测量的RSSI"""
+        return self._last_wifi_rssi_dbm
+    
+    @property
+    def recv_buffer(self):
+        """TCP接收缓冲区"""
+        return self._recv_buffer
+    
+    @recv_buffer.setter
+    def recv_buffer(self, value):
+        """设置TCP接收缓冲区"""
+        self._recv_buffer = value
+    
+    # ==================== WiFi 连接方法 ====================
+    
+    def is_wifi_connected(self):
+        """检查WiFi是否已连接"""
+        # 优先用 MaixPy network（如果可用）
+        try:
+            from maix import network
+            wlan = network.WLAN(network.TYPE_WIFI)
+            if wlan.isconnected():
+                self._wifi_connected = True
+                return True
+        except:
+            self.logger.warning("Failed to check WiFi connection using MaixPy network", exc_info=True)
+        
+        # 兜底：看系统 wlan0 有没有 IP
+        try:
+            ip = os.popen("ifconfig wlan0 2>/dev/null | grep 'inet ' | awk '{print $2}'").read().strip()
+            if ip:
+                self._wifi_connected = True
+                self._wifi_ip = ip
+                return True
+        except:
+            self.logger.warning("Failed to check WiFi connection using system command", exc_info=True)
+        
+        self._wifi_connected = False
+        return False
+    
+    def connect_wifi(self, ssid, password, verify_callback=None, persist=True, timeout_s=20):
+        """
+        连接 Wi-Fi（先用新凭证尝试连接并验证可用性；失败自动回滚；成功后再决定是否落盘）
+        
+        重要：系统的 /etc/init.d/S30wifi 通常会读取 /boot/wifi.ssid 与 /boot/wifi.pass 来连接 WiFi。
+        因此要"真正尝试连接新 WiFi"，必须临时写入 /boot/ 触发重启；若失败则把旧值写回去（回滚）。
+        
+        Args:
+            ssid: WiFi SSID
+            password: WiFi密码
+            verify_callback: 验证回调函数，接收 (ip) 参数，返回 (success: bool, error: str)
+            persist: 是否持久化保存凭证
+            timeout_s: 连接超时时间（秒）
+        
+        Returns:
+            (ip, error): IP地址和错误信息（成功时error为None）
+        """
+        # 配置文件路径定义
+        conf_path = "/etc/wpa_supplicant.conf"
+        ssid_file = "/boot/wifi.ssid"
+        pass_file = "/boot/wifi.pass"
+
+        def _read_text(path: str):
+            try:
+                if os.path.exists(path):
+                    with open(path, "r", encoding="utf-8") as f:
+                        return f.read()
+            except Exception:
+                return None
+            return None
+
+        def _write_text(path: str, content: str):
+            with open(path, "w", encoding="utf-8") as f:
+                f.write(content)
+
+        def _restore_boot(old_ssid: str | None, old_pass: str | None):
+            # 还原 /boot 凭证：原来没有就删除，原来有就写回
+            try:
+                if old_ssid is None:
+                    if os.path.exists(ssid_file):
+                        os.remove(ssid_file)
+                else:
+                    _write_text(ssid_file, old_ssid)
+            except Exception:
+                pass
+            try:
+                if old_pass is None:
+                    if os.path.exists(pass_file):
+                        os.remove(pass_file)
+                else:
+                    _write_text(pass_file, old_pass)
+            except Exception:
+                pass
+
+        old_conf = _read_text(conf_path)
+        old_boot_ssid = _read_text(ssid_file)
+        old_boot_pass = _read_text(pass_file)
+
+        try:
+            # 生成 wpa_supplicant 配置（写 /etc 作为辅助，具体是否生效取决于 S30wifi 脚本）
+            net_conf = os.popen(f'wpa_passphrase "{ssid}" "{password}"').read()
+            if "network={" not in net_conf:
+                raise RuntimeError("Failed to generate wpa config")
+
+            try:
+                _write_text(
+                    conf_path,
+                    "ctrl_interface=/var/run/wpa_supplicant\n"
+                    "update_config=1\n\n"
+                    + net_conf,
+                )
+            except Exception:
+                # 不强制要求写 /etc 成功（某些系统只用 /boot）
+                pass
+
+            # ====== 临时写入 /boot 凭证，触发 WiFi 服务真正尝试连接新 SSID ======
+            _write_text(ssid_file, ssid.strip())
+            _write_text(pass_file, password.strip())
+
+            # 重启 Wi-Fi 服务
+            os.system("/etc/init.d/S30wifi restart")
+
+            # 等待获取 IP
+            wait_s = int(timeout_s) if timeout_s and timeout_s > 0 else 20
+            wait_s = min(max(wait_s, 5), 60)
+            for _ in range(wait_s):
+                ip = os.popen("ifconfig wlan0 2>/dev/null | grep 'inet ' | awk '{print $2}'").read().strip()
+                if ip:
+                    # 拿到 IP 不代表可上网/可访问目标；继续做可达性验证
+                    self._wifi_connected = True
+                    self._wifi_ip = ip
+                    self.logger.info(f"[WIFI] 已连接，IP: {ip}，开始验证网络可用性...")
+
+                    # 验证能访问指定目标（通过回调函数）
+                    if verify_callback:
+                        success, error = verify_callback(ip)
+                        if not success:
+                            raise RuntimeError(error or "Verification failed")
+
+                    # ====== 验证通过 ======
+                    if not persist:
+                        # 不持久化：把 /boot 恢复成旧值（不重启，当前连接保持不变）
+                        _restore_boot(old_boot_ssid, old_boot_pass)
+                        self.logger.info("[WIFI] 网络验证通过，但按 persist=False 回滚 /boot 凭证（不重启）")
+                    else:
+                        self.logger.info("[WIFI] 网络验证通过，/boot 凭证已保留（持久化）")
+
+                    return ip, None
+
+                std_time.sleep(1)
+
+            raise RuntimeError("Timeout: No IP obtained")
+
+        except Exception as e:
+            # 失败：回滚 /boot 和 /etc，重启 WiFi 恢复旧网络
+            _restore_boot(old_boot_ssid, old_boot_pass)
+            try:
+                if old_conf is not None:
+                    _write_text(conf_path, old_conf)
+            except Exception:
+                pass
+            try:
+                os.system("/etc/init.d/S30wifi restart")
+            except Exception:
+                pass
+
+            self._wifi_connected = False
+            self._wifi_ip = None
+            self.logger.error(f"[WIFI] 连接/验证失败，已回滚: {e}")
+            return None, str(e)
+    
+    def disconnect_wifi(self):
+        """断开WiFi连接并清理资源"""
+        if self._wifi_socket:
+            try:
+                self._wifi_socket.close()
+            except Exception:
+                pass
+            finally:
+                self._wifi_socket = None
+        self._wifi_connected = False
+        self._wifi_ip = None
+    
+    # ==================== WiFi 质量监测 ====================
+    
+    def _get_wifi_rssi_dbm(self):
+        """
+        获取 WiFi 信号强度（dBm，越大越好；比如 -40 比 -80 好）
+        由于不同固件实现差异，这里做多策略兜底，失败返回 None
+        """
+        # 1) 优先使用：iw dev wlan0 link
+        #    你提供的输出示例包含：signal: -58 dBm
+        try:
+            out = os.popen("iw dev wlan0 link 2>/dev/null").read()
+            if out:
+                m = re.search(r"signal:\s*(-?\d+(?:\.\d+)?)\s*dBm", out, re.IGNORECASE)
+                if m:
+                    v = float(m.group(1))
+                    # 合理范围兜底
+                    if -120.0 <= v <= 0.0:
+                        return v
+                m2 = re.search(r"signal:\s*(-?\d+(?:\.\d+)?)", out, re.IGNORECASE)
+                if m2:
+                    v = float(m2.group(1))
+                    if -120.0 <= v <= 0.0:
+                        return v
+        except Exception:
+            pass
+
+        # 2) 兜底：iwconfig
+        try:
+            out = os.popen("iwconfig wlan0 2>/dev/null").read()
+            m = re.search(r"Signal level[=:]\s*(-?\d+(?:\.\d+)?)\s*dBm", out, re.IGNORECASE)
+            if m:
+                v = float(m.group(1))
+                if -120.0 <= v <= 0.0:
+                    return v
+            m2 = re.search(r"Signal level[=:]\s*(-?\d+(?:\.\d+)?)", out, re.IGNORECASE)
+            if m2:
+                v = float(m2.group(1))
+                if -120.0 <= v <= 0.0:
+                    return v
+        except Exception:
+            pass
+
+        return None
+    
+    def _measure_wifi_tcp_rtt_ms(self, host, port, samples=3, per_sample_timeout_ms=900):
+        """
+        测量：在当前 WiFi 下，TCP 建连耗时（RTT 的近似）
+        
+        Args:
+            host: 目标主机
+            port: 目标端口
+            samples: 采样次数
+            per_sample_timeout_ms: 每次采样超时时间（毫秒）
+        
+        Returns:
+            (median_rtt_ms, reachable_bool)
+        """
+        rtts = []
+        reachable = False
+        addr = None
+
+        # 先解析一次地址，避免每次样本都做 DNS
+        try:
+            addr_info = socket.getaddrinfo(host, port)[0]
+            addr = (addr_info[0], addr_info[1], addr_info[2], addr_info[-1])
+        except Exception:
+            return float("inf"), False
+
+        for _ in range(max(1, int(samples or 1))):
+            s = None
+            try:
+                s = socket.socket(addr[0], addr[1], addr[2])
+                s.settimeout(max(0.1, float(per_sample_timeout_ms) / 1000.0))
+                t0 = time.ticks_ms()
+                s.connect(addr[-1])
+                elapsed_ms = abs(time.ticks_diff(time.ticks_ms(), t0))
+                rtts.append(float(elapsed_ms))
+                reachable = True
+            except Exception:
+                # 单个样本失败不影响整体，只要有成功样本就继续
+                pass
+            finally:
+                try:
+                    if s:
+                        s.close()
+                except Exception:
+                    pass
+
+            # 小间隔，避免过度占用
+            try:
+                time.sleep_ms(100)
+            except Exception:
+                pass
+
+        if not rtts:
+            return float("inf"), False
+
+        rtts_sorted = sorted(rtts)
+        mid = len(rtts_sorted) // 2
+        if len(rtts_sorted) % 2 == 1:
+            median = rtts_sorted[mid]
+        else:
+            median = (rtts_sorted[mid - 1] + rtts_sorted[mid]) / 2.0
+        return median, reachable
+    
+    def _is_wifi_quality_bad(self, wifi_rtt_ms, wifi_rssi_dbm):
+        """
+        综合判断 WiFi 质量是否差：
+        - RTT中位数超过阈值 -> bad
+        - 若启用 RSSI：信号弱(RSSI更差于阈值) 且 RTT 也偏高 -> bad
+        """
+        if wifi_rtt_ms >= config.WIFI_QUALITY_RTT_BAD_MS:
+            return True
+
+        if not getattr(config, "WIFI_QUALITY_USE_RSSI", False):
+            return False
+
+        if wifi_rssi_dbm is None:
+            return False
+
+        # "rtt_warn + rssi_bad" 联合条件
+        if wifi_rtt_ms >= config.WIFI_QUALITY_RTT_WARN_MS and wifi_rssi_dbm <= config.WIFI_QUALITY_RSSI_BAD_DBM:
+            return True
+
+        return False
+    
+    def get_wifi_quality_status(self):
+        """
+        获取当前 WiFi 质量状态（用于调试或显示）
+        
+        Returns:
+            dict: {"rtt_ms": float, "rssi_dbm": float, "is_bad": bool}
+        """
+        rtt = self._last_wifi_rtt_ms
+        rssi = self._last_wifi_rssi_dbm
+        is_bad = False
+        
+        if rtt is not None and rtt != float("inf"):
+            is_bad = self._is_wifi_quality_bad(rtt, rssi)
+        
+        return {
+            "rtt_ms": rtt if rtt is not None and rtt != float("inf") else None,
+            "rssi_dbm": rssi,
+            "is_bad": is_bad
+        }
+    
+    # ==================== 后台质量监测线程 ====================
+    
+    def start_quality_monitor(self, network_type_callback, on_poor_quality_callback):
+        """
+        启动 WiFi 质量后台监测线程（每 5 秒测量一次 RTT 和 RSSI）
+        只在 WiFi 连接时运行，不影响业务发送性能
+        
+        Args:
+            network_type_callback: 获取当前网络类型的回调函数
+            on_poor_quality_callback: WiFi质量差时的回调函数
+        """
+        if self._wifi_quality_monitor_thread is not None:
+            self.logger.warning("[WiFi Monitor] 监测线程已在运行")
+            return
+        
+        self._network_type_callback = network_type_callback
+        self._on_poor_quality_callback = on_poor_quality_callback
+        self._wifi_quality_stop_event.clear()
+        self._wifi_quality_monitor_thread = threading.Thread(
+            target=self._quality_monitor_loop,
+            daemon=True,
+            name="wifi_quality_monitor"
+        )
+        self._wifi_quality_monitor_thread.start()
+        self.logger.info("[WiFi Monitor] 已启动后台监测线程")
+    
+    def stop_quality_monitor(self):
+        """停止 WiFi 质量监测线程"""
+        if self._wifi_quality_monitor_thread is None:
+            return
+        
+        self._wifi_quality_stop_event.set()
+        try:
+            self._wifi_quality_monitor_thread.join(timeout=2.0)
+        except Exception as e:
+            self.logger.error(f"[WiFi Monitor] 停止线程失败：{e}")
+        finally:
+            self._wifi_quality_monitor_thread = None
+            self.logger.info("[WiFi Monitor] 已停止后台监测线程")
+    
+    def _quality_monitor_loop(self):
+        """
+        WiFi 质量监测循环（后台线程）
+        每 5 秒测量一次 RTT 和 RSSI，发现质量差则触发切换
+        """
+        while not self._wifi_quality_stop_event.is_set():
+            try:
+                # 只在 WiFi 连接时才测量
+                network_type = self._network_type_callback()
+                if network_type == "wifi" and self._wifi_socket:
+                    # 测量 RTT（1 个样本，快速测量）
+                    rtt_ms, reachable = self._measure_wifi_tcp_rtt_ms(
+                        self._server_ip, self._server_port,
+                        samples=1, per_sample_timeout_ms=600
+                    )
+                    
+                    # 获取 RSSI
+                    rssi_dbm = self._get_wifi_rssi_dbm()
+                    
+                    # 更新缓存
+                    self._last_wifi_rtt_ms = rtt_ms if reachable else None
+                    self._last_wifi_rssi_dbm = rssi_dbm
+                    self.logger.debug(f"[WiFi Monitor] - RTT={rtt_ms:.0f}ms, RSSI={rssi_dbm:.0f}dBm")
+                    
+                    # 判断质量是否差（切换前做 2 次快速复测，防止瞬时抖动）
+                    def _is_bad_now(_reachable, _rtt, _rssi):
+                        if (not _reachable) or (_rtt is None) or (_rtt == float("inf")):
+                            return True
+                        return self._is_wifi_quality_bad(_rtt, _rssi)
+
+                    bad = _is_bad_now(reachable, rtt_ms, rssi_dbm)
+                    if bad:
+                        self.logger.warning("[WiFi Monitor] 质量差,切换前快速重试 2 次（每次间隔1秒）")
+
+                        for retry_idx in range(2):
+                            time.sleep_ms(1000)
+                            rtt2, reachable2 = self._measure_wifi_tcp_rtt_ms(
+                                self._server_ip, self._server_port,
+                                samples=1, per_sample_timeout_ms=600
+                            )
+                            rssi2 = self._get_wifi_rssi_dbm()
+
+                            # 更新缓存，便于外部查看最新状态
+                            self._last_wifi_rtt_ms = rtt2 if reachable2 else None
+                            self._last_wifi_rssi_dbm = rssi2
+
+                            bad2 = _is_bad_now(reachable2, rtt2, rssi2)
+                            try:
+                                self.logger.info(
+                                    f"[WiFi Monitor] 复测{retry_idx+1}/2: reachable={reachable2}, "
+                                    f"rtt={rtt2 if rtt2 != float('inf') else -1:.0f}ms, rssi={rssi2}, bad={bad2}"
+                                )
+                            except Exception:
+                                pass
+
+                            if not bad2:
+                                self.logger.info("[WiFi Monitor] 复测恢复正常，继续保留 WiFi（不切换）")
+                                bad = False
+                                break
+
+                        if bad:
+                            self.logger.warning("[WiFi Monitor] 复测仍差/不通，尝试切换到 4G")
+                            self._on_poor_quality_callback()
+                
+                # 休眠 5 秒
+                time.sleep(5)
+                
+            except Exception as e:
+                self.logger.error(f"[WiFi Monitor] 监测异常：{e}")
+                # 异常后继续循环，避免线程退出
+                continue
+
+
+# 全局 WiFi 管理器实例
+wifi_manager = WiFiManager()
+
+
+# ==================== 兼容旧接口的函数 ====================
+
+def is_wifi_connected():
+    """尽量判断当前是否有 Wi-Fi（有则走 Wi-Fi OTA，否则走 4G OTA）"""
+    return wifi_manager.is_wifi_connected()
+
+
+def connect_wifi(ssid, password, verify_callback=None, persist=True, timeout_s=20):
+    """
+    连接 Wi-Fi 并将凭证持久化保存到 /boot/ 目录，
+    以便设备重启后自动连接。
+    
+    Args:
+        ssid: WiFi SSID
+        password: WiFi密码
+        verify_callback: 验证回调函数，接收 (ip) 参数，返回 (success: bool, error: str)
+        persist: 是否持久化保存
+        timeout_s: 超时时间（秒）
+    
+    Returns:
+        (ip, error): IP地址和错误信息（成功时error为None）
+    """
+    return wifi_manager.connect_wifi(ssid, password, verify_callback, persist, timeout_s)